Bể gia nhiệt tuần hoàn có chương trình, 5 lít
Model: CW-05P
Code: AAH52305PK
Hãng sản xuất: JEIOTECH – Hàn Quốc
Xuất xứ: Hàn Quốc
1. Tính năng kỹ thuật:
Bộ điều khiển chương trình hóa thông minh:
- 10 programs available for temperature ramp up and dwell control.
- 10 steps per a program and 99 hours 59 minutes per a step.
- Stored programs are easily linkable.
- Programs can be repeated up to 99 cycles.
- Pre-heating and heating time are settable before program starts.
- Microprocessor PID control / automatic tuning / auto run.
Tính năng vận hành:
- +5℃ above room temperature to 150℃.
- Three point temperature calibration.
- Digital timer for delayed ON / OFF. (from 1 min to 99 hr 59 min)
- Protection against over-temperature and low fluid level.
- Digital input and output control function for interlocking external devices.
- Colorful LCD display with interactive input system.
- Keypad lock function prevents accidental changes during operation.
- Splash-proof keypad.
- RS-232 interface.(RS-232 to USB serial converter is provided.)
Cấu trúc:
- Accurate, stable, and efficient temperature management by using a powerful variable-speed pump. (1 to 3 steps of the pump for internal circulation and 4 and 5 steps for external circulation)
- Isolated design of agitator, heater, and sensor by a baffle plate to minimize the turbulence in the bath fluid and also to protect users and samples against direct contact.
- Protection against low fluid level and dry running by auto-matic shut down of the heater together with audible and visual alarms.
- Corrosion-resistant, seamless, leak-proof, round-cornered, and easy-to-clean stainless steel reservoir with a drain valve.
- Powerful pressure and suction pumps provide contrast pressure and flow rate throughout the whole temperature range.
- Quick-release front grille for easy cleaning of the condenser.
- Compact footprints ideal for cramped lab space.
2. Thông số kỹ thuật:
Model
|
CW-05P
|
CW-10P
|
CW-20P
|
CW-30P
| |
Bath Volume (L / cu ft)
|
5 / 0.2
|
10 / 0.4
|
20 / 0.7
|
30 / 1.1
| |
Working Temperature Range 2) (℃ / ℉)
|
Amb. +5 to 150 / Amb. +9 to 302
| ||||
Temperature Stability 1) (±℃ / ℉)
|
0.05 / 0.09
|
0.05 / 0.09
|
0.1 / 0.18
|
0.1 / 0.18
| |
Pump
|
Max. Pressure, Max. Flow Rate
|
5.9 PSI (406.8 millibar), 7.4 gallons / minute (28 liters / minute)
| |||
Max. Suction Flow Rate
|
2.6 gallons / minute (10 liters / minute)
| ||||
Dimension
|
Bath Opening / Depth
(W×L, D) (mm / inch) |
150×99, 160
/ 5.9×3.9, 6.3 |
211×154, 180
/ 8.3×6.1, 7.1 |
290×214, 200
/ 11.4×8.4, 7.9 |
300×264, 230
/ 11.8×10.4, 9 |
Overall
(W×L×H) (mm / inch) |
220×395×424
/ 8.7×15.6×16.7 |
281×450×444
/ 11.1×17.7×17.5 |
360×510×464
/ 14.2×20.1×18.3 |
370×560×494
/ 14.6×22×19.4 | |
Net Weight (kg / lbs)
|
12.5 / 27.6
|
15 / 33
|
17.5 / 38.6
|
19.5 / 43
| |
Requirements (230V, 50 / 60 Hz)
|
4.5A
|
6.7A
|
8.8A
|
8.8A
| |
Cat. No.
|
AAH52305PK
|
AAH52315PK
|
AAH52325PK
|
AAH52335PK
| |
1) Technical data according to DIN 12876.
2) If you operate the unit in 1 to 3 steps of pump, the temperature range can be from
Amb. +5℃ but in 4 and 5 steps, the range will be from Amb. +15℃.
*Bath fluid : water
2) If you operate the unit in 1 to 3 steps of pump, the temperature range can be from
Amb. +5℃ but in 4 and 5 steps, the range will be from Amb. +15℃.
*Bath fluid : water
3. Cung cấp bao gồm:
- Bể gia nhiệt tuần hoàn có chương trình 5 lít; Model: CW-05P; Code: AAH52305PK
- Phụ kiện tiêu chuẩn
Tài liệu hướng dẫn sử dụng tiếng Anh + tiếng Việt
Không có nhận xét nào:
Đăng nhận xét