Thứ Ba, 27 tháng 6, 2017

Bể điều nhiệt tuần hoàn lạnh có chương trình, 20 lít Model: RW-3025P Code: AAH57207K Hãng sản xuất: JEIOTECH – Hàn Quốc Xuất xứ: Hàn Quốc

Bể điều nhiệt tuần hoàn lạnh có chương trình, 20 lít
Model: RW-3025P
Code: AAH57207K
Hãng sản xuất: JEIOTECH – Hàn Quốc
Xuất xứ: Hàn Quốc


1.      Tính năng kỹ thuật:
Bộ điều khiển chương trình hóa thông minh:
-          10 programs available for temperature ramp up and dwell control.
-          10 steps per a program and 99 hours 59 minutes per a step.
-          Stored programs are easily linkable.
-          Programs can be repeated up to 99 cycles.
-          Pre-heating and heating time are settable before program starts.
-          Microprocessor PID control / automatic tuning / auto run.
Tính năng vận hành:
-          Temp. range:  from -25 to 150 for RW-25P Models.
-          3-temp. range specific calibration.
-          (For more accurate and precise temperature control, It has equipped three temperature range specific calibration function to satisfy users with better test result.)
-          Digital timer for delayed ON / OFF. (from 1 min to 99 hr 59 min)
-          Protection against over-temperature and low fluid level.
-          Digital input and output control function for interlocking external devices.
-          Colorful LCD display with interactive input system
-          Splash-proof keypad.
-          RS-232 interface.
Cấu trúc:
-          Suitable for both internal and external bath environment due to reduced turbulence by using five-speed duplex pump and built-in cooling coil. (1 to 3 steps of the pump for internal circulation and 4 and 5 steps for external circulation)
-          Isolated design of agitator, heater, and sensor by a baffle plate to minimize the turbulence in the bath fluid and also to protect users and samples against direct contact.
-          Protection against low fluid level and dry running by auto-matic shut down of the heater together with audible and visual alarms.
-          Corrosion-resistant, seamless, leak-proof, round-cornered, and easy-to-clean stainless steel reservoir with a drain valve.
-          Usage of CFC-free refrigerant (R-507, R-404A) and a double service valve for leakage prevention.
-          Quick-release front grille for easy cleaning of the condenser.
-          Compact footprints ideal for cramped lab space.
2.      Thông số kỹ thuật:
Model
RW-0525P
RW-1025P
RW-2025P
RW-3025P
Bath Volume (L / cu ft)
5 / 0.2
10 / 0.4
20 / 0.7
30 / 1.1
Working Temperature Range ( / )
-25 to 150 / -13 to 302
Temperature Stability (± / ) at -10
0.05 / 0.09
Cooling
Capacity
at -20 (-4), W
30
50
260
390
at 0 (+32), W
230
250
410
570
at +20 (68), W
320
380
560
680
Refrigerator
1 / 3 LBP, R-507
1 / 3 LBP, R-507
1 / 2 LBP, R-404A
3 / 4 LBP, R-404A
Pump
Max. Pressure, Max. Flow rate
5.9 PSI (406.8 millibar), 7.4 gallons / minute (28 liters / minute)
Max. Suction Flow Rate 1)
2.6 gallons / minute (10 liters / minute)
Dimension
Bath Opening / Depth
(W×L, D) (mm / inch)
150×99, 160
/ 5.9×3.9, 6.3
211×154, 180
/ 8.3×6.1, 7.1
290×214, 200
/ 11.4×8.4, 7.9
300×264, 230
/ 11.8×10.4, 9
Overall
(W×L×H) (mm / inch)
302×438×690
/ 11.9×17.2×27.2
360×490×780
/ 14.2×19.3×30.7
380×560×825
/ 15×22×32.5
440×620×895
/ 17.3×24.4×35.2
Net Weight (kg / lbs)
37 / 81.6
44 / 97
60 / 132.2
70 / 147.7
Electrical Requirements (230V, 50Hz)
7A
9.2A
12.8A
13.8A
Cat. No.
AAH57204K
AAH57205K
AAH57206K
AAH57207K
* Technical data according to DIN 12876.
* The cooling capacity is measured under 230V / 60Hz electrical condition.
1) Additional suction pump is optional.
3.      Cung cấp bao gồm:
-          Bể điều nhiệt tuần hoàn lạnh có chương trình, 30 lít; Model: RW-3025P; Code: AAH57207K
-          Phụ kiện tiêu chuẩn

-          Tài liệu hướng dẫn sử dụng tiếng Anh + tiếng Việt

Không có nhận xét nào:

Đăng nhận xét