SAT-500_Máy phân tích độ mặn, phân tích muối
Model: SAT-500
Hãng sản xuất: TOADKK – Nhật Bản
Xuất xứ: Nhật Bản
1. Tính năng kỹ thuật:
- The SAT-500 salt / chloride analyzer is designed to measure the concentration of salt and chloride ions quickly and easily in all types of products and where low level chloride measurement is required. It is an extremely helpful tool in the busy QA/QC lab or where high accuracy and quick analysis time is required.
- Typical measurement time is under 30 seconds.
- Extremely accurate.
- Absolute method. No silver nitrate reagent is used. titrant standardization is not necessary.
- Simply dispense the sample with a pipette into the measuring cell. Measurement begins automatically.
- Built in printer
- Direct concentration displayed on instrument display.
- Data memory for 300 results
- Optional PC software is available for spreadsheet data control/archive
- Dilution ration and sample size are settable
- The SAT-500 salt / chloride analyzer
- The SAT-500 salt / chloride analyzer
- Measuring Principle:
§ The SAT-500 is a dedicated coulometric titrator for chloride. Silver is stripped from the cathode, a pure silver wire, via an electrical current. By incorporating Coulombs law, very low levels of silver can be generated which in turn complex with the chloride in solution from the sample. The solution potential is monitored with a silver wire and reference electrode sensing system to determine the end point of the reaction, the point at which all the chloride ions have complexed with silver, forming a silver chloride precipitate.
§ The instrument calculates the concentration and the results are automatically displayed and printed out in %(w/v), %(w/w), mg/l, or mol/l as NaCl or Cl (selectable).
2. Thông số kỹ thuật:
Measuring Range and resolution
|
2ul pipette: 0.01 - 49.99% (+/- 0.01%)
20ul pipette: 0.001 to 4.999% (+/- 0.001%) 200ul pipette: 0.0001 to 0.4999% (+/- 0.0001%) Other: 0.000 to 99.99% (depends on calibration solution concentration) |
Lower limit
|
0.02% at 200ul sample
0.2% at 20 ul sample 2.0% at 2ul sample |
Repeatability
|
less than 0.5% in c.v. value at 1% of NaCl standard solution with 20ul pipette
|
Calculation constant
|
Possible to set dilution ratio, constants, ec.
|
Calibration
|
Automatic single point calibration using standard NaCl solution
|
Measurement Start
|
Automatic start on detection of potential change or manual start using key
|
Printer
|
Built in thermal printer
|
Data Memory
|
300 data points (with backup)
|
Outputs
|
RS-232C (for PC or Ext. Printer)
Output 1 (for auto injector) Output 2 (for Sample Changer) |
Power source
|
AC line, 100-240V, 50/60 Hz
|
Power Consumption
|
Approx. 20VA (Max)
|
Dimensions (mm)
|
Main: 190(w) x 192(h) x 385(d)
Measuring section: 110(w) x 370(h) x 220 (d) |
Weight
|
Main: 3.3Kg, Meas. section: 1.1Kg
|
3. Cung cấp bao gồm:
- Main Unit:
SAT-500-0-2-B-0-B
|
Salt analyzer complete with standard accessories
|
- Standard Accessories for the SAT-500
Part Number
|
Description
| |
AG-111
|
Silver Electrode
|
(2 pcs.)
|
SAT-AG
|
Silver wire for electrolysis
|
(1 pce.)
|
ELR-003
|
Reference Electrode
|
(1 pce.)
|
6784580K
|
reference junctions
|
(2 pcs)
|
SAT-1F1
|
Electrolyte
|
500 mls.
|
SAT-1G1
|
Addition Reagent, Gelatin
|
50 mls.
|
SAT-1Z1
|
Polishing compound
|
50 mls.
|
SAT-1E1
|
Reference electrode filling solution (potassium sulfate)
|
100 mls.
|
SAT-B20
|
measuring cell, 20 ml capacity
|
(2 pcs.)
|
SAT-SB
|
Stirrer
|
1 unit
|
SAT-1A1
|
10% NaCl standard Solution (for 2ul syringe)
|
100 mls.
|
SAT-1A2
|
1% NaCl standard Solution (for 20ul syringe
|
100 mls.
|
SAT-SB
|
Stir Bar (5 x 17mm)
|
(2 pcs.)
|
PAP-HCS
|
Thermal Printer Paper
|
5 rolls/pack
|
HEX-ACL3
|
power cord
| |
SAT-INST
|
Instruction Manual
|
1 copy
|
- Tài liệu hướng dãn sử dụng (Tiếng Anh, Tiếng Việt)
Không có nhận xét nào:
Đăng nhận xét